Mobile App Settings
SnapInspect Support avatar
Written by SnapInspect Support
Updated over a week ago

SnapInspect 3 has a built in settings function. This allows for our users to make adjustments quickly when you are on the go.

The first thing you will see when you log into the mobile app is the Assets tab.

You will notice a little "cog wheel" on the top left corner of the above image. When tapped on will take you to the Settings function of the mobile app.

When you tap on the cog wheel you will be brought to a new menu with an array of options. 

The settings provided above are:
​ 

- Auto Login:

This setting is useful to have enabled at all times as it remembers your username and password. Meaning less time to log in and more time on actually doing the inspections.

- Inspection Timer

This setting allows you to track the duration of every inspection you run on the mobile app, driving efficiency and accountability

- Display Instruction:

This setting is a very new and neat method that allows you to setup little instructions within the app. This is used more so to ensure your agents can see your specific instruction that you might have provided them with for each area or each item.
​ 

- Save To Album: 

What this setting does when enabled is saves every photo you take during inspections and saves it into a specific individual folder for you to be able to find and use later on. The quality of the photo will be the best quality your phone could possibly do. This feature comes in handy if you require your photos to be of very high quality.
​ 
​ 
​ - Photo Date/Time Stamp:

You are able to use this if you wish to have date and time under each photo you take within the app, this will then generate on the inspection report.
​ 

- Photo GPS Location

This setting allows you to see the GPS location of each image taken throughout your inspection, this will be shown on the bottom of the images.
​ 
​ - Local Email Client:
​ 
 This setting, when enabled, will use your mobile device primary email that is setup on the device to be used for quick send. This means it allows the app to send using your email you to your clients using the email provided you have logged in with it. This also means that when sending emails they will show up in your email sent box.
​ 
 If you decide to just leave this disabled then we will only send emails on behalf of you and at times could have issues being received by the receiver because most email providers will see that we are sending these emails on behalf of you and not as you. You will also not be able to see these emails via your sent box when sent on behalf of you.

- Ask Support:
​ 
 This will allow you to have a direct conversation with the support or sales team while on your device. You will need to be connected to the internet to be able to communicate with the SnapInspect team. This is to ensure that if you ever get stuck or require assistance while on the road, then we are able to help you then and there without having to go back to your office.

Did this answer your question?